|
Mediatechnics Systems
Inc.
TC 8000 Duplication Controller
Page 6
________________________________________________________________________________
Menus
Structure
Use
the up /\ and down \/ arrow keys to position the cursor
(a > character on the left most column of the display)
to the desired menu item. Then use the ENTER key to
select it.
Following is a description of each
menu selection.
Start Copying
Use this menu option to start copying CD-Rs by reading
the master to the hard disk and then copy from the hard
disk image. See the Copying CD-Rs section of this chapter
for further instructions
Start Comparing
Use this menu option to start verifying CD-Rs. See the
Verifying CD-Rs section of this chapter for further
instructions.
Copy CD to CD
Use this menu option to read a master, save the data
to the hard disk and make copies at the same time. See
the section Copying CD-Rs (CD to CD) for more information.
Image Functions
This menu option is used to maintain image files kept
on the hard drive. This menu item will not be shown
if Multi Image HD is not enabled in the Setup|Duplication
Options function.
Load New Master
Read CD and put the image on the hard drive without
copying or verifying.
List of Images
Show all CD images currently stored on the hard drive
Show HD Free Space
Display the currently available hard drive space. If
CD images have been erased more space may be created
by defragmenting the hard drive using Image Functions|Defragment
HD function.
Delete Image
Delete a CD image stored on the hard drive.
Rename Image
Rename a CD Image currently stored on the hard drive.
See the Entering Text section of this chapter for instructions
on inputting text.
Defragment HD
Recover all hard drive space associated with erased
CD images. Depending on the hard drive size and the
number and size of erased CD images this function can
take several minutes to complete.
Utilities
The utilities menu provides several useful functions
required to maintain and set up your CD-R Tower system.
Hard Disk Utilities
These utilities are used to set up and maintain the
hard drive in your system. The hard drive provides a
temporary storage buffer for the CDs you will be copying
or verifying.
Show HD Free Space
Display the currently available hard drive space. If
CD images have been erased more space may be created
by defragmenting the hard drive using Image Functions|Defragment
HD function.
Show HD Info
Display the installed hard disk information. This includes
manufacturer, model, drive firmware revision and total
space in megabytes (MB).
Defragment HD
Recover all hard drive space associated with erased
CD images. Depending on the hard drive size and the
number and size of erased CD images this function can
take several minutes to complete.
System HD Format
This function initializes the hard drive directory structure.
It should be run anytime a new hard drive is installed
in a system. This function can also be used to quickly
erase all images in the hard drive.
NOTE:
This function does not actually remove CD Images from
the hard drive and is not a secure erase of the image
data. It simply marks all the hard drive as unused and
available for CD Images.
<Go
Back> <Next Page>
To Page 1,
2,
3, 4, 5,
6, 7,
8, 9,
10, 11,
12, 13,
14, 15,
16, 17,
18, 19,
20, 21,
22, 23,
24, 25,
26, 27,
28
|
