Mediatechnics Systems
Inc.
TC 8000 Duplication Controller
Page 17
________________________________________________________________________________
Installing
Writers and Readers
Following are general guidelines for installing CD-R
Writers.
Manufacturer
Following is a list of recommended drives for use in
TC-8000 systems:
Ø R-Quest TrueCopy 12S (12x10x32)
Ø R-Quest TrueCopy 16S (16x10x40)
Ø Plextor PX-R820Ti (8x20)
Ø Plextor PX-W8220Ti (8x2x20)
Ø Plextor PX-W124TSi (12x4x32)
Ø Plextor PX-W1210TSi (12x10x32)
Ø Plextor UltraPlex 40 - As a reader only.
Other drive types may be supported
from time to time. Please check with your authorized
R-Quest distributor for an up to date list of supported
drives.
Firmware Revision
R-Quest recommends that all writers have the same version
of firmware. Drive firmware may be checked using the
Utilities|System Information|Writer Info menu function,
and upgraded using the Utilities|Firmware Utilities|Load
Drive F/W.
Only drive firmware provided by
R-Quest can be used to upgrade drives within a TC-8000
Series system. Firmware files from the drive manufacturers
cannot be used to upgrade firmware with a TC-8000 Series
system. While writer firmware be upgraded with manufacturer
supplied firmware outside the system, it is not recommended
to use firmware which is not approved by R-Quest.
<Go
Back> <Next Page>
To Page 1,
2,
3, 4, 5,
6, 7,
8, 9,
10, 11,
12, 13,
14, 15,
16, 17,
18, 19,
20, 21,
22, 23,
24, 25,
26, 27,
28
|