|
Mediatechnics Systems
Inc.
TC 8000 Duplication Controller
Page 5
________________________________________________________________________________
Operation
This chapter provides detailed operating instructions
for your TC-8000 CD-R Tower. Your CD-R Tower has many
options and features designed to make it more productive
and easier to use. Please read through this chapter
carefully so that you can take full advantage of all
the features of your system.
Turning On
When the TC-8000 CD-R Tower is turned on it goes through
a series of self-tests and displays several messages.
Following are all the messages displayed
during a normal power-up:
First:
TC-8000 Series
(c) 1999-2001
R-Quest Technologies
Then several status messages will
be displayed. And Finally:
>Start Copying
Start Comparing
Copy CD to CD
Image Functions
If this series of messages are displayed then your CD-R/RW
Tower is ready for use. If this series of messages are
not displayed or different messages are displayed see
the Error Messages section of this manual.
Keyboard
Following is the function of each key on the keyboard:
< YES Key
Left arrow or YES - If being prompted to enter a number
or character this key moves the cursor 1 character to
the left. If prompted with a question this key answers
YES.
> NO Key
Right arrow or NO - If being prompted to enter a number
or character this key moves the cursor 1 character to
the right. If prompted with a question this key answers
NO.
/\ Key
/\ (up arrow) - If being prompted to enter a number
or character this key increments the character at the
cursor to the next higher character or number. If a
menu is being displayed this key moves the cursor to
the next menu selection up.
\/ Key
\/ (down arrow) - If being prompted to enter a number
or character this key decrements the character at the
cursor to the next lower character or number. If a menu
is being displayed this key moves the cursor to the
next menu selection down.
Enter Key
If being prompted to enter a number or name this key
accepts the currently displayed selection. If a menu
is being displayed the ENTER key moves 1 level deeper
into the menu structure. If the next item is executable
it starts that process.
Stop Key
This key stops or aborts whatever is going on. When
writing CD-Rs the system is busy and this key may be
sluggish so press and hold it down until prompted to
do something else.
While a menu is being displayed
the STOP key backs up 1 level higher in the menu structure.
LCD Display
The LCD display is used either to display menus or to
show status. For instance while copying it shows what
it is doing, the number it has to do, how many it has
done and the current mode (Disk at once or track at
once).
<Go
Back> <Next Page>
To Page 1,
2,
3, 4, 5,
6, 7,
8, 9,
10, 11,
12, 13,
14, 15,
16, 17,
18, 19,
20, 21,
22, 23,
24, 25,
26, 27,
28
|
