3. COMPARE
This menu will guide you to perform a bit-by-bit comparison between the Master Reading Source and all the copied discs inside the writer tray. The purpose to perform this compare operation is to ensure all of your copies have the exactly same information as your Master Reading Source.

4. TEST + COPY
This menu will guide you to perform the simulation of copying process and if everything has passed during the simulation, a real copying process will be performed. If there’s an error encountered during the simulation, an error message will be displayed and the copying process will not be initiated.

5. COPY + COMPARE
This menu will guide you to make copies for you and after the copy process has been finished, it will perform an additional comparison process automatically to ensure data correctness.

6. VERIFY

This menu will guide you to perform Disc Readability Check. This operation will check the readability of your mater discs and the copied discs. The purpose to perform this verify operation is to ensure all of your copies are readable.

To perform this operation, your Master Reading Source must not be the Hard Drive and a master disc is requried to be inside the Master Reading Source. If you try to perform this operation with the Hard Drive as your source, you will be prompted with an option to set the Reader as your Master Reading Source.

7. SELECT SPEED
This menu will guide you to adjust the duplication speed on various duplication modes. For more information, please refer to “Tutorial Guide III –Select the Duplication Speed”

8. SELECT SOURCE
This menu will guide you to set the Master Reading Source. For more information, please refer to “Tutorial IV – Select the Master Reading Source”

9. QUICK ERASE
This menu will guide you to erase your rewriteable discs in the WRITER Tray.

10. HDD IMAGE SETUP
This menu will guide you to perform various Hard Drive related operations such as Load, Rename, Delete your images. For more information, please refer to “Tutorial Guide V, VI, VII, and VIII”

11. EDIT AUDIO TRACK
This menu will guide you to perform Audio Tracking Selection feature. This feature will help you combine audio tracks from various CDs into a single customize audio CD. For more information, please refer to “Tutorial Guide X – Audio CD Editing.”

SETUP

12.1 Language
This setting will allow you to choose which language you prefer to navigate this duplicator.

12.2 Auto Start
This setting will allow you to turn on/off of Auto Start feature. This feature will allow the duplicator to copy automatically once your master disc and all of the writer trays of the duplicator are fulfilled with recordable media. However, in order for this feature to take effect, you need to be inside the operation menu such as COPY, TEST, TEST+COPY, and COPY+COMPARE.

12.3 Read Error Skip
Normally, when the duplicator encountered a reading error while reading your master disc, all the duplication will be aborted and all the recordable media will be ruined. However, if you believe that your master disc has a small, insignificant error due to physical damages, you can enable the setting to allow the duplicator to skip any read error it has encountered.
*This function will not fix the error; it will only skip it to make rest of data readable.