Tutorial Guide:
VI. Assign Existing Image as the Active Image
An image is a unit inside the Hard Drive which represents the master disc you have loaded onto the Hard Drive. The active Image is a very critical component in the duplication process from Hard Drive. It basically tells the duplicator which existing image inside the Hard Drive you want to deal with. As you may aware, the Hard Drive inside the duplicator can contain many Images. The operation you want to do such as copy, rename, and delete are all acted upon a single image at a time. To tell the duplicator which image it is going to be, you need the assign that particular image as the Active Image. To do so, please follow instructions below:
1. Use UP or DOWN arrow button to navigate to the following screen.
DUPLICATOR 1.00
10. HDD Image Setup
2 Press “>>” to enter HDD Image Setup Menu and you shall see the following:
HDD Image Setup
1.Select Image
4 Press “>>” to enter Choose Image Menu and you shall see the following:
Choose Image
1->[FUN ] DVD
4 Use UP or DOWN arrow button to find the desired image and then press “>>” to submit your selection and you shall see the following for 2 seconds.
Image [FUN ] DVD
Selected!
Then, you will be directed back to HDD Image Setup Menu.
HDD Image Setup
1.Select Image
|
Tutorial Guide:
VII. Rename Existing Hard Drive Image Name
Every image inside the Hard Drive has a name. The name for each image is created when you load a new image into the Hard Drive. However, if you don’t like the name you entered before, you can rename it anytime after. To rename your existing image name, please do the following:
1. Use UP or DOWN arrow button to navigate to the following screen.
DUPLICATOR 1.00
10. HDD Image Setup
2. Press “>>” to enter HDD Image Setup Menu and you shall see the following:
HDD Image Setup
1.Select Image
3. Use UP or DOWN arrow button to navigate to the following screen.
HDD Image Setup
3.Rename Image
4. Press “>>” to enter Rename Image Menu and you shall see the following:
Choose Image
1->[FUN ] DVD
5. Use UP or DOWN arrow button to find the desired image and then press “>>” to submit your selection and you shall see the following:
Edit HDD Image Name
[FUN ] OK
|
