Tutorial Guide
IX. Change the SETUP settings
Most of the internal settings and information are stored inside the SETUP menu. To explore and modify them are simple. Below is the example to turn on the “Auto Start” setting.
1. Use UP or DOWN arrow button to navigate to the following screen.
DUPLICATOR 1.00
12. Setup
2. Press “>>” to enter Setup Menu and you shall see the following:
Setup
1. Language
3. Use UP or DOWN arrow button to navigate to the following screen.
Setup
2. Auto Start
4. Press “>>” to enter Auto Start Setting Menu and you shall see the following:
Auto Start
Off
5. Use UP or DOWN arrow button to modify the setting to “On” and then press “>>” to submit your selection and you shall see the following:
Setup
2. Auto Start
6. If you would like to modify more settings, then please go back to step 3. Otherwise, press “<<” button to bring you back to main menu.
DUPLICATOR 1.00
12. Setup
|
Tutorial Guide:
X. Audio CD Editing
This process will guide you to perform Audio Tracking Selection feature. This process will help you combine audio tracks from various CDs into a single customize audio CD.
In order for the duplicator to do all those things, you need a temporary storage location to hold your songs before the duplicator can make it an audio CD. The following are the choices you will have:
· Hard Drive(if Hard Drive Installed):
By choosing “Hard Drive” as the temporary storage location, you will be instructed to load all of your favorite songs into the Hard Drive and after you have selected all of your favorite songs, you will be instructed to copy them onto a blank 80 min CD-R media.
· Blank CD-R media:
By choosing “Blank CD-R” as the temporary storage location, you will be instructed to copy all of your favorite songs into the blank CD-R you’ve inserted and after you have finished, you will be instructed to finalize the CD-R disc.
When you turned on your duplicator, you should see the following when your duplicator is ready.
DUPLICATOR 1.00
1. COPY
1. Going to the “Edit Audio Track” menu
Press UP or DOWN arrow button to navigate to the following screen.
DUPLICATOR 1.00
11. Edit Audio Track
2. If your duplicator does not have a Hard Drive installed, please skip to Step 4. However, if your duplicator does have a Hard Drive installed, you will see the following:
Edit Track To:
Blank CD-R
|
